Adhesives        
Acrylics
Aerosols
Anaerobics
Cyanoacrylates
Epoxies
Glue Dots
Hot Melt Adhesives
Methacrylates
Mold Releases
Sealants
Silicones
Solvent-Free
Structural Adhesives
Urethanes
UV Adhesives

   Applicators         
Accessories
Dispensers
Dual Dispensing
Epoxy
Hot Melt Dispensers
Hot Melt Bulk
Hot Melt Hoses
Hot Melt Rolls
Hot Melt Parts Nozzles/Parts
Motionless Mixers
Robots
Structural

Demonstrations

Bar Code Printer
Box Printer

Equipment
Drum Unloader
Slot Die Applicator
Cold Glue Applicator
Fiberized Spray Pattern Controllers
Bulk Meters
Drum Meters
Adhesive Feeders
Metering Station
Supply Units
Service Plan
   
   Applications       
Carton Sealing
Electronic Materials
Encapsulants
Green Adhesives
Magnet Bonding
Marine Adhesives
Medical Device
One Part Adhesives
Packaging
Potting
Robotic
Solvent-Free Spray
Space Age Adhesive
Surfacing Adhesives
Transportation
Woodworking

Literature                
About Bonding
Data Sheets
Journals
Line Card
MSDS
Tech Menu

      
Meeting Customer expectations
and requirements is the main objective
 of   ISO 9001:2008
 

WHAT DO YOU THINK OF US?

 We would appreciate your help so that we can provide you with the very best in services. Your response to any of our emloyees will help us address the areas of performance needing improvement.
ENTER HERE

Datco produces a wide variety of LOW COST adhesive ROLL COATERS
for packaging and product manufacturing. The line of Roll Coaters are compact and affordable
and now include Rollers for both hot melt and cold adhesives and in lengths up to 50 inches.
DATCO produces six basic models:

MINI ROLL   4 inch x 2 1/2 inch roll Constant Surface Speed of 200 inches per minute. Self contained glue reservoir Weighs only 16 lbs. Optional hold down roll Offered in 120V                       BIG ROLL   4 1/2 inch diameter roll Available in lengths up to 18" mounted or 24"  unmounted High volume reservoir EZ-adjust Doctor blade Variable speed Microprocessor temp control Offered in 120V or 240V                          HOT ROLL 2 1/2 inch diameter roll Available in sizes from 6" to 18" unmounted and up to 36" table mounted Variable speed Micrprocessor temp control Available in 120V or 240V                     BASIC ROLL   2 1/2 inch diameter roll Available in 6 and 12 inch models Constant speed (approx 20 ft/min) Electronic analog Temp control 120V                VERSA ROLL HOT   4 1/2 inch diameter roll Microprocessor temp control Available in sizes from 13" to 50" Heated Roller Removable Glue Reservoir Coat either top or bottom Suitable for PUR adhesives Two Temperature Control Zones Varaiable Speed AC Drive Available in 120V or 240V                VERSA ROLL COLD   4 1/2 inch diameter roll Stainless steel roll Available in sizes from 6" to 50" Removable Glue Reservoir Coat either bottom or top Suitable for water based adhesives Variable speed AC drive Available in 120V or 240V          MINI ROLL      BASIC ROLL     BIG ROLL    HOT ROLL     VERSA ROLL HOT      VERSA ROLL COLD                                                             All models offer under temperature protection for the motors driving the  roll to prevent them from running prior to the glue becoming molten.          Options include: Knurled surface on roll, Slotted doctor blades for stripe coating,        Single or Double Hold Down Rolls on certain models-both driven and idler, and other        custom modifications to meet your requirements.

For more information: Call 1-800-323-5158

Email: gluguru@on-hand.com