Adhesives        
Acrylics
Aerosols
Anaerobics
Cyanoacrylates
Epoxies
Glue Dots
Hot Melt Adhesives
Methacrylates
Mold Releases
Sealants
Silicones
Solvent-Free
Structural Adhesives
Urethanes
UV Adhesives

   Applicators         
Accessories
Dispensers
Dual Dispensing
Epoxy
Hot Melt Dispensers
Hot Melt Bulk
Hot Melt Hoses
Hot Melt Rolls
Hot Melt Parts Nozzles/Parts
Motionless Mixers
Robots
Structural

Demonstrations

Bar Code Printer
Box Printer

Equipment
Drum Unloader
Slot Die Applicator
Cold Glue Applicator
Fiberized Spray Pattern Controllers
Bulk Meters
Drum Meters
Adhesive Feeders
Metering Station
Supply Units
Service Plan
   
   Applications       
Carton Sealing
Electronic Materials
Encapsulants
Green Adhesives
Magnet Bonding
Marine Adhesives
Medical Device
One Part Adhesives
Packaging
Potting
Robotic
Solvent-Free Spray
Space Age Adhesive
Surfacing Adhesives
Transportation
Woodworking

Literature                
About Bonding
Data Sheets
Journals
Line Card
MSDS
Tech Menu

      
Meeting Customer expectations
and requirements is the main objective
 of   ISO 9001:2008
 

WHAT DO YOU THINK OF US?

 We would appreciate your help so that we can provide you with the very best in services. Your response to any of our emloyees will help us address the areas of performance needing improvement.
ENTER HERE

  LOCTITE ACRYLIC ADHESIVES
 

Loctite Adhesives were developed for
structural bonding applications that
require tensile, shear and peal strength
combined with maximum impact, stress,
and shock resistance.
 

Henkel's Loctite Indigo™
Visible Light Cure Acrylic Adhesive
and Equipment Solutions
Enter (Click) here for more information!

• Two-Step No Mix Structural Acrylics
• Two-Part Structural Acrylics
• Loctite Magnet Bonding
• Loctite 3030  Two component,thixotropic acrylic adhesive.
• Plastic and Composite Bonders Properties Chart
• Metal Bonder  Properties Charts
• Low Odor/Non-Flammable Properties Chart
  
  TWO-STEP NO MIX ACRYLICS when in contact with a liquid activator,
  these no mix materials cure rapidly at room temperature to a weather-resistance bond.
  Ideal for close fitting parts where extended open time is required.
  
  324 High Impact Speedbonder- Ideal for large gap applications.
  A structural adhesive that offers strength of an epoxy and the speed of an instant adhesive
  . Solvent resistant. Cures in minutes. Specially formulated for toughness and impact strength.
  325 High Temperature Speedbonder-Solvent resistant, activator -cured in minutes.
  Forms flexible bonds on gaps up to 0.40". Designed for severe environments and temperatures at 350F
  326 Fast Fixture Speedbonder-An all-purpose bonder. A structural adhesive that offers strength
  of an epoxy and the speed of an instant adhesive. Solvent resistant. Cures in minutes. Ideal for
  applications requiring fast fixturing.
  330 Depend No-Mix Adhesive- A no-mix high viscpsity adhesive for a wide range of materials
  including metal, wood, ferrite, ceramic, and plastic.
  332 Structural Adhesive Severe Environment-An activator-cured, no -mix adhesive that provides
   high temperature capability with thermal durability to 350F
  384 Output
  Repairable Thermally Conductive-Mounts components to heat sinks but allows removable or
  repair or replacement. Output Activator is required for curing.
  
  
  
   
  
  TWO PART STRUCTURAL ADHESIVES when statistically mixed, these adhesives develop a tough,
  durable bond and to a wide range of substrates.
   
  
  Loctite Two-Part structural acrylics are available in
  mixer friendly packaging to minimize waste and
  process time.

  Refer to the dispensing section for available dual
  cartridge dispensers and mixer nozzles.

SPEED BONDER

H3000 Speedbonder General Purpose A low viscosity general purpose adhesive ideal
for bonding plastics and composites.
H3300 Speedbonder General Purpose, Fast Fixture A non -sag, fast ,
fast fixturing structural adhesive for bonding plastics and composites.
H3151 Speedbonder Metal Bonder Extended open time allows for adjustment of parts.
Excellent bond strength on aluminum and steel. Impact and peel resistant.
H4100 Speedbonder Ultra Fast Ultra fast fixturing structural adhesive. Forms strong
 bonds to plastics and composites.
H4200 Speedbonder Toughened A general purpose plastic and composite bonder with
high peel and impact resistance. Fixtures in 15 minutes.
H4500 Speedbonder Metal Bonder High strength structural adhesive for metals.
Fixtures in 10 minutes.
H4800 Speedbonder Toughened Provides extended open time, making it ideal for the
assembly and adjustment of large parts. Excellent peel and impact resistance.
High bond strengths on composites.
3410 Speedbonder Low Odor/Non Flammable A fast setting, non-sag gel structural adhesive
 with minimal odor. Acid free. Fixtures in 10 minutes.
3411 Speedbonder Metal Bonder A medium setting, non-sag gel structural adhesive with
minimal odor. Acid free. Fixtures in 15 minutes.
H3412 Speedbonder Low Odor/Non-Flammable. A general purpose structural adhesive.
Good for light impact and light peel applications.
3413 Speedbonder Low Odor/Non-Flammable. A low odor, slow setting non-sag gel structural adhesive.
Fixtures in 120 minutes. Ideal for bonding larfe parts that require adjustment time.
3414 Speedbonder metal Bonder This toughened, non-sag gel adhesive provides excellent bond strength
 on aluminum. Excellent peel strength.

   

        
Plastic and Composite Bonders              Metal Bonder                 Low Odor/Non-Flammable
 

LOCTITE 3030

LOCTITE® Product 3030 is a fast curing, two component,thixotropic acrylic adhesive.
It is designed primarily to bond to many low energy substrates such as poly(ethylene)
and poly(propylene) but can be used as a general purpose adhesive on may other substrates as well.

TYPICAL APPLICATIONS
Product 3030 is designed for bonding to difficult substrates,
such as HDPE, LLDPE, and polypropylene. The product offers good resistance to many chemicals.

For more information, pricing, ordering-Call 1-800-323-5158 or Email

Product 3030 Data Sheet

3030 Material Safety Data Sheet Part A

3030Material Safety Data Sheet Part B